MALE ELBOW FITTING FOR MULTILAYER
MALE ELBOW FITTING FOR MULTILAYER
Brass compression fitting for multilayer pipe. It fixes a pipe (pex-Al-pex) from one side to a female threaded point on the other, with a direction change of the pipe run at right angle (90º). It allows fixing an accessory or threaded point (internal) with a multilayer pipe. It is composed by five pieces: a body ended on a male thread and elbow shape, one insert with its corresponding sealing O-rings, a clamping ring, a teflon joint and a nickeled nut. The insert is introduced within the body and the pipe within the insert, so the whole group is fixed when tightening the nickeled nut around the clamp ring. It is an adaptor of polyethylene pipe to point or accessory threaded female. Product range with thread male dimension from 1/2” to 1.1/4” and pipe diameter from 16 mm to 32 mm, with pipe thickness from 2,0 mm to 2,9 mm depending on the size.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NI952116 | 1/2" x 16 x 2,0 | 0.0850 | 10 | 210 | 8435084070205 |
| NI952118 | 1/2" x 18 x 2,0 | 0.1110 | 10 | 160 | 8435084070212 |
| NI952120 | 1/2" x 20 x 2,0 | 0.1370 | 5 | 140 | 8435084070229 |
| NI952220 | 3/4" x 20 x 2,0 | 0.1390 | 5 | 140 | 8435084070236 |
| NI952225 | 3/4" x 25 x 2,3 | 0.1940 | 5 | 100 | 8435084070243 |
| NI952325 | 1" x 25 x 2,3 | 0.2050 | 5 | 100 | 8435084070250 |
| NI952332 | 1" x 32 x 2,9 | 0.3970 | 50 | 8435084070267 | |
| NI952432 | 1.1/4" x 32 x 2,9 | 0.4030 | 50 | 8435084070274 |
